2.9. USB and Audio Connection
2.9.1. USB Ports
The MFD8/12 has one USB Ver. 1.0 port and the MFDBB has two USB Ver. 2.0 ports.
These USB ports are used to connect a generic USB mouse and Keyboard. Virtually
any "off the shelf" USB mouse (wired or RF wireless but NOT Bluetooth) will work with
NavNet3D. However, in order to utilize full RotoKey functionality, you will need a mouse
that has a scroll wheel that is also "clickable" with a middle click, which will emulate
selection and confirmation of a desired RotoKey function. No loading of additional
mouse software is permitted. However, the standard Mouse HID drivers will load
automatically, allowing most mice and wireless mice to work fine.
Generic USB keyboards may be used to enter Name and Numerical Position. The
Keyboard can also emulate the key of NavNet3D:
To Next Page
Loading...
