*The switches, dial, and trimmers in the gure are shown in the initial setting position.
Antenna
Precautions when turning the power switch on and off.
When the data is changed using the edit keys or trim levers, wait at least two seconds before turning off the power. If the power is
turned off within two seconds after the data is changed, the new data will not be written to memory.
Digital Dial 3 (DL3)
Mechanical ATL
adjusting screw
Throttle trigger
Power&Display
switch
Digital Trim 2 (DT2)
(default throttle trim)
Grip Handle
Digital Trim1 (DT1)
(default steering trim)
Digital Trim 3 (DT3)
Digital Dial 1 (DL1)
(default dual rate)
Steering wheel
Push switch 2 (PS2)
Push switch 1 (PS1)
Push switch 3 (PS3)
LED
LCD screen
Edit buttons
Nomenclature
Transmitter T4PKSR
Digital Dial 2 (DL2)
(default ATL)
Wheel tension
adjusting screw
Trigger tension
adjusting screw
Battery cover
Cover
Trigger slide
adjusting screw
To Next Page
Loading...
