FUTABA 4PK-2.4G SuperR - Vibrator Function VIBRA

130
Function
(Opening Screen)
MENU 1
Press t
he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t
he button
* When the direct call button
is set, the setup screen is also
called by the following method:
•Select the setting item by
button
*
blinks at the current
setup item.
Setup items
TIMER TIME-UP :Timer time up
LAP-NAVI :Navigation alarm
FUEL RES-START :Fuel timer restart
PUSH SW ON :At push sw on
PUSH SW OFF :At push sw off
POWER-ON :At power on
LOW-BATT ALRM :Low battery
LOW-BATT ALRM
POWER-ON
FUEL RES-START
LAP-NAV
TIMER TIME-UP
PUSH SW ON
MENU 1
MENU 2
PUSH SW OFF
Vibrator Function "VIBRA"
The vibrator built into the grip can be activated at lap navigation navigate alarm, each
racing timer time up, powering ON, push sw on/off and low battery alarm.
The vibrator operation pattern can be selected from among 7 types
1
(Setting vibrator)
Select the setting item by (JOG) button up or down operation
and select the type by pressing the (+) or (-) button.
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
Vibrator setup
Navigation alarm (LAP-NAVI)
OFF, TYPE-1~TYPE-7
Initialization :OFF
Timer time up (TIME-UP)
OFF, TYPE-1~TYPE-7
Initialization :OFF
At push sw off (PUSH SW OFF)
OFF, TYPE-1~TYPE-7
Initialization :OFF
Low battery (LOW-BATT)
OFF, TYPE-1~TYPE-7
Initialization :TYPE-7
Vibrator Function "VIBRA"
Setup item selection
- Select by (JOG) button up or
down operation.
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen.
Setting item selection
The items move in the order
shown in the figure above.
Fuel timer restart
( FUEL RES-START )
OFF, TYPE-1~TYPE-7
Initialization :OFF
At power on (POWER-ON)
OFF, TYPE-1~TYPE-7
Initialization :OFF
At push sw on
( PUSH SW ON )
OFF, TYPE-1~TYPE-7
Initialization :OFF