4WS Mixing "4WS MIX"
This function can be used with crawlers and other 4WS type vehicles. It is mixing that
uses the 1st CH to control front side steering and the 3rd CH to control rear side steer-
ing.
OFF (front side only), reverse phase, same phase, rear side only, and other 4WS type
switching is used by selecting PS1 or PS2 with the function select function (p.96).
Special Mixes "S-MIX" (4WS MIX)
When the set SW is operated
in the opening screen state,
the 4WS mode is displayed
here for about 2 seconds.
Setup items
MODE : 4WS Type
RATE :
3ch rate (Rear side)
MXMD : Mix mode
The display is different depending on
the type selected with MODE. The
gure shown below is for the 4TYP.
Press t
he button
•Select the setting item by
button
*
blinks at the current
setup item.
When the 3rd CH was set to ACT at Brake Mixing (p.74) or when Gyro Mixing (P92)
is used, 4WS mixing cannot be used.
Setting Special mixings
Display when 4WS type switching
switch is not set.
To Next Page
Loading...
