Grip Vibrator
A vibrator is built into the grip of the T4PKSR. The vibrator vibrates at racing timer lap
navigation, time-up, and low battery alarm. (p.130)
Total timer display (H:M)
Battery voltage display
Steering trim display
Throttle trim display
User name display
When the (END) button is held down for 1 second or longer at the initial screen, the
Futaba logo and user name are displayed for about 2 seconds.
Edit button lock display
Trim/dial lock display
Power switch turned on
Beep conrmation sound is generated and the
initial screen shown below appears.
Display when power switch is turned on
Function names and rate as-
signed to dials are displayed.
Display mode can be
changed by using the SYS-
TEM function. (See pge 108)
Model name (10 characters)
*The current servo mode (servo
response) is displayed.
The mode currently operating is
displayed. ("HIGH"/"NOR")
"BLHT" is displayed when
backlighting is ON.
When radio waves are being emit-
ted, "RF" is displayed. When radio
waves are not being emitted when
turned on by display switch and
when the DSC function is used,
"DISP" is displayed.
*The current receiver type is
displayed.
The type currently operating is
displayed.
("C1"/"C2")
Power supply and voltage display
Dry cell batteries (alkali batteries are recommended) can be used with the optional bat-
tery box. However, when using dry cell batteries, set BATT-TYPE in the system menu
to DRY 4CELL. When BATT-TYPE is set to DRY 4CELL, the voltage display of the
initial screen will change to the
symbol.
When using the T4PKSR standard HT5F1700B battery, always set BATT-TYP to
NiMH5 LiFe2. (See page 110, for a detailed description of the battery types.)
To Next Page
Loading...
