Setup items
1: Function assigned to button No. 1
2: Function assigned to button No. 2
3: Function assigned to button No. 3
4: Function assigned to button No. 4
5: Function assigned to button No. 5
6: Function assigned to button No. 6
7: Function assigned to button No. 7
8: Function assigned to button No. 8
Direct selection function assignment
1
The setup screen of this function is called by pressing the
(DIR) button for 3 seconds or longer from the initial screen.
2
(Direct button selection)
Select the function you wish to customize (No.1~8) by (JOG)
button up or down operation.
3
(Assignment function selection)
Change the function by pressing the (+) or (-) button.
4
When ending setting, return to the initial screen by pressing
the (END) button and (DIR) button one time each, in that or-
der.
Direct Customize
With the T4PKSR, your favorite direct call matched to the purpose can be assigned to
the edit buttons by using the direct customize function.
Direct call lets you create a different menu for each model memory.
Direct call assigned to each edit button can also be copied to other models by using
menu copy of the model copy function (p.110).
(Opening Screen)
(Direct Customize Screen)
To Next Page
Loading...
