Setting item
MODE :Speed type selection
ALL :Speed adjustment
Setup item selection
- Select by (JOG) button up or
down operation.
Setting item
MODE :Speed type selection
LOW :Low side range speed
adjustment
HIGH :High side range speed
adjustment
TGP1 :Low and medium speed
switching point
Setup item selection
- Select by (JOG) button up or down operation.
When a value of 99 or less is set
at either LOW or HIGH, the dis-
play is switched from OFF to ON
by trigger operation.
Throttle trigger position
The LOW and HIGH ranges
are linked to the TGP1 set
point and displayed.
64
Throttle Speed "THSPD"
(Preparation)
- Select the setting item "MODE" by (JOG) button up or down
operation. Press the (+) or (-) button and select "1 SPEED".
1
("ALL" delay adjustment)
Select "ALL" by (JOG) button up or down operation.
Use the (+) or (-) button to adjust the delay of the entire
throttle forward side range.
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for direct selection, press the (END)
button once).
Adjustment method for 1 SPEED
When a value of 99 or less is
set at ALL setting, the display
is switched from OFF to ON by
trigger operation.
Adjustment range
LOW :1~100
HIGH :1~100
At 100%, there is no delay.
TGP1 :1~100
(Preparation)
- Select the setting item "MODE" by (JOG) button up or down
operation. Press the (+) or (-) button and select "2 SPEED".
1
("LOW" and "HIGH" delay adjustment)
Select "LOW" or HIGH" by (JOG) button up or down opera-
tion.
Use the (+) or (-) button to adjust the delay of the entire
throttle forward side range.
2
(Speed switching point adjustment)
When you want to change the "LOW" and "HIGH" switching
point, select the setting "TGP1" by (JOG) button up or down
operation.
3
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
Adjustment method for 2 SPEED
Adjust button
- Adjust with the (+) and (-) but-
tons.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
Initial value
LOW, HIGH :"100"
TGP1 :30
Speed type Select button
- Select with the (+) or (-) but-
tons.
Adjust button
- Adjust with the (+) and (-) but-
tons.
- Return to the initial value "100"
by pressing the (+) and (-) but-
tons simultaneously for about 1
second.
Adjustment range
1~100% (each direction)
At 100%, there is no delay.
Speed type Select button
- Select with the (+) or (-) but-
tons.
To Next Page
Loading...
