• Precautions ----------------------------------3
•
Warranty and Repair Service (in U.S.A.)
--8
• Introduction ---------------------------------9
• Features --------------------------------------9
• Contents ----------------------------------- 11
• Specications ----------------------------- 14
• Recommended Servos ------------------- 15
• Replacement and Optional Items ------- 15
•
Connecting the GY701 to your Receiver
16
• LED Indicator Description -------------- 19
• Mechanics Preparation------------------- 20
• Opening Screen --------------------------- 22
• Home Screen ------------------------------ 23
• Warning Display -------------------------- 30
• Edit Screen -------------------------------- 32
• Gyro Basic Setting ----------------------- 34
• Gyro Sensor Installation ----------------- 36
•
Tail Rotor Servo Installation and Setup
-- 37
• Before Flight Checklist ------------------ 40
• Adjustments During the Test Flight ---- 41
• Using Normal Mode --------------------- 43
• Setting the Gain --------------------------- 44
• Governor Basic Setting ------------------ 46
• Mounting the Magnet and Sensor ------ 54
• Fuselage Setting Precautions ----------- 58
• Governor Operation ---------------------- 60
• Governor Speed Setting ----------------- 62
• S.BUS Basic Setting --------------------- 64
• Gyro Expert Setting ---------------------- 68
• Governor Expert Setting ----------------- 76
Meaning of Special Markings
Pay special attention to safety where indicated
by the following marks:
DANGER
- Procedures which may lead to
dangerous conditions and cause death/serious
injury if not carried out properly.
WARNING
- Procedures which may lead to a
dangerous condition or cause death or serious
injury to the user if not carried out properly, or
procedures where the probability of superficial
injury or physical damage is high.
CAUTION
- Procedures where the possibility
of serious injury to the user is small, but there is
a danger of injury, or physical damage, if not car-
ried out properly.
: Prohibited
: Mandatory
Gyro
: Instructions for gyro function
Governor
: Instructions for governor function
Technical updates and additional programming
examples can be found at:
www.futaba-rc.com/faq