Gamma Vacuum SPCe - Unpacking the Controller; Inspect for Obvious Damage; Check Equipment Received

3. Unpacking the controller
3.1. Inspect for any obvious damage
If the SPCe is damaged in any way, a claim should be led with the carrier
immediately and notication given to Gamma Vacuum.
If equipment must be returned for inspection or repair, obtain authorization
from Gamma Vacuum prior to shipping. Contact Gamma Vacuum for
authorization and return instructions.
3.2. Check the equipment received
Ensure that all items shipped have been received. If any items are missing,
notify the carrier and Gamma Vacuum. Save all packaging material for
inspection.
04/2021 - ©Gamma
Page 12900026_F
900026_F - Unpacking the controller