G&D DP-HR-U-CPU - Console Module DP-HR-U-CON-Fiber

Console module »DP-HR-U-CON-Fiber«
Computer and console modules (DP-HR-U) · 110
Console module »DP-HR-U-CON-Fiber«
With DP-HR-U-CON-Fiber console modules, you can connect a console (DisplayPort
monitor, keyboard, mouse and audio devices) to a digital matrix switch of the Con-
trolCenter-Compact or ControlCenter-Digital series.
At the installed console, matrix switch users can access a computer module to operate
the connected computer.
The data stream of the connected USB devices is transmitted to the active computer
module with up to 16 Mbit/s (
DVI-U-CPU, DP-U-CPU, DP-HR-U-CPU and VGA-U-CPU series
only).
Package contents
 1 × DP-HR-U-CON-Fiber consle module
 1 × Power cable
 1 × »Manual information« flyer
 1 × »Safety instructions« flyer
Required accessories
 1 × Compatible optical fibre cable to connect the console module to the
matrix switch
NOTE: This console module can be connected to a compatible fiber port of
ControlCenter-Compact matrix switches or ControlCenter-Digital matrix switches
(requires CCD-I/O 16-Card-Fiber).
IMPORTANT: Both, the console module and the fiber ports are available as single-
mode variants or as multimode variants. Make sure that the port at the console module,
the fiber port and the optical fibers are compatible with each other.