G&D DP-HR-U-CPU - Console Module DP-HR-U-CON-MC2

Console module »DP-HR-U-CON-MC2«
93 · Computer and console modules (DP-HR-U)
Console module »DP-HR-U-CON-MC2«
With DP-HR-U-CON-MC2 console modules, you can connect a dual-monitor console
(two
DisplayPort monitors, keyboard, mouse and audio devices) to a digital matrix
switch of the ControlCenter-Compact or ControlCenter-Digital series.
At the installed console, matrix switch users can access a computer module to operate
the connected computer.
The data stream of the connected USB devices is transmitted to the active computer
module with up to 16 Mbit/s (
DVI-U-CPU, DP-U-CPU, DP-HR-U-CPU and VGA-U-CPU series
only).
When using the console to access a computer module DP-HR-CPU-MC2 connected to a
dual-head computer, the monitors display the separate images of the graphics out
-
puts.
When accessing a computer module with one graphics input only, only the first
monitor displays an image.
Package contents
 1 × Console module DP-HR-U-CON-MC2
 1 × Power cable
 1 × »Manual information« flyer
 1 × »Safety instructions« flyer
ADVICE: Instead of an MC2 computer module, you can also connect a dual-head
computer by using two separate computer modules
DP-HR-CPU.
In this case, add both computer modules in the web application to channel group.