Console module »DP-HR-U-CON-2«
Computer and console modules (DP-HR-U) · 86
Console module »DP-HR-U-CON-2«
With DP-HR-U-CON-2 console modules, you can connect a console (DisplayPort moni-
tor, keyboard, mouse and audio devices) to two digital matrix switches of the Con-
trolCenter-Compact or ControlCenter-Digital series.
At the installed console, matrix switch users can access a computer module to operate
the connected computer.
The data stream of the connected USB devices is transmitted to the active computer
module with up to 16 Mbit/s (
DVI-U-CPU, DP-U-CPU, DP-HR-U-CPU and VGA-U-CPU series
only).
The buttons on the front panel of the console module or configured key combina-
tions (select keys) let users switch between the connected matrix switches.
Package contents
1 × DP-HR-U-CON-2 console module
1 × Power cable
1 × »Manual information« flyer
1 × »Safety instructions« flyer
Required accessories
2 × Category 5e (or better) twisted pair cables to connect the consle module to
two the matrix switches
ADVICE:
Instead of a matrix switch, you can also connect a compatible computer
module to each of the two channels.