4 · Computer and console modules (DP-HR-U)
Computer module »DP-HR-U-CPU«
With DP-HR-U-CPU computer modules, you can connect a computer with DisplayPort
graphics output to a digital matrix switch of the ControlCenter-Compact or Control-
Center-Digital series.
Users at the consoles of the matrix switch can access the computer module and operate
the connected computer.
The data stream of the USB devices connected to the active console module (DVI-U-
CON
, DP-U-CON and DP-HR-U-CON series only) is transmitted to the computer with up to
16 Mbit/s.
Package contents
1 × Computer module DP-HR-U-CPU
1 × DisplayPort video cable (DP-Cable-M/M-2)
1 × USB device cable
2 × Audio cable
1 × Power pack (12V/2A, only with variants incl. PowerPack)
1 × Power cable (only with variants incl. PowerPack)
1 × »Manual information« flyer
1 × »Safety instructions« flyer
Required accessories
1 × Category 5e (or better) twisted pair cable to connect the computer module to
the matrix switch
A
Computer modules