Computer module »DP-HR-U-CPU-UC«
9 · Computer and console modules (DP-HR-U)
Computer module »DP-HR-U-CPU-UC«
With DP-HR-U-CPU-UC computer modules, you can connect a computer with Display-
Port graphics output to two different digital matrix switch of the ControlCenter-Compact
or ControlCenter-Digital series.
At the consoles of both matrix switches, users can access a computer module to
operate the connected computer.
The data stream of the USB devices connected to the active console module (DVI-U-
CON
, DP-U-CON and DP-HR-U-CON series only) is transmitted to the computer with up to
16 Mbit/s.
Package contents
1 × DP-HR-U-CPU-UC computer module
1 × DisplayPort video cable (DP-Cable-M/M-2)
1 × USB device cable
2 × Audio cable
1 × Power pack (12V/2A, only with variants incl. PowerPack)
1 × Power cable (only with variants incl. PowerPack)
1 × »Manual information« flyer
1 × »Safety instructions« flyer
Required accessories
2 × Category 5e (or better) patch cables to connect the computer module to
two different matrix switches