G&D DP-HR-U-CPU - Computer Module DP-HR-U-CPU-Fiber-MC2

Computer module »DP-HR-U-CPU-Fiber-MC2«
Computer and console modules (DP-HR-U) · 40
Computer module
»DP-HR-U-CPU-Fiber-MC2«
With DP-HR-U-CPU-Fiber-MC2 computer modules, you can connect a computer with
DisplayPort graphics outputs (dual-head) to a digital matrix switch of the Control-
Center-Compact or ControlCenter-Digital series.
Users at the consoles of the matrix switch can access the computer module and oper-
ate the connected computer.
The data stream of the USB devices connected to the active console module (DVI-U-
CON
, DP-U-CON and DP-HR-U-CON series only) is transmitted to the computer with up to
16 Mbit/s.
NOTE: This computer module can be connected to a compatible fiber port of
ControlCenter-Compact matrix switches or ControlCenter-Digital matrix switches
(requires
CCD-I/O 16-Card-Fiber).
IMPORTANT: Both, the computer module and the fiber ports are available as single-
mode variants or as multimode variants. Make sure that the port at the computer
module, the fiber port and the optical fibers are compatible with each other.
IMPORTANT: Only consoles configured for multi-monitor operation via channel
grouping can show the images of both of the computer’s video outputs on separate
monitors.
At consoles with one monitor only, the image of the computer’s second video out-
put is not displayed.