GARDASOFT RC1 Series - Page 23

RC1xx LED Lighting Controllers - User Manual
— 23 —
When the RC1xx is not being congured, the display shows the status of
the lighting output as shown below:
The RC1xx displays an error if a light is connected but no rating specied.
To congure the RC1xx from the front panel, press and hold SEL for 1
second. CH1 is displayed. You can then use the  and  keys to scroll
through the menu, pressing the SEL button to access the required set up
as shown in the table below:
Display Select to:
CH1 To set up an output channel.
Eth Set up Ethernet access.
LOC Set up a key lock.
tES Factory test. Do not use.
FrE Set up the internal trigger.
trg View the trigger status.
UAL View the output current.
rAt Set the lighting rating.