GARDASOFT RC1 Series - Viewing the Trigger Status; Viewing the Output Current

RC1xx LED Lighting Controllers - User Manual
— 29 —
10.2.9 Viewing the trigger status
You can view the trigger input status and whether the light is pulsing when
the RC1xx is set to pulse or switched mode. To do this, press and hold SEL
for I second and CH1 is displayed. Use the  and  keys to scroll to trg
and press SEL. The display shown below appears:
10.2.10 Viewing the output current
You can view an approximate measure of the output current from the
RC1xx front panel. The current measurement is updated roughly once per
second, but this can be slower when the RC1xx is set to pulsed operation.
To view the output current, press and hold SEL for 1 second and follow the
keystrokes below:
CH1 is displayed.
Use the  and  buttons to scroll to UAL
and press the SEL button.
CH1 is displayed. Press the SEL button.
The measured output current is displayed.
Press the SEL button.
Continue to use the RC1xx normally.