GARDASOFT RC1 Series - Getting Started; Rc1 Xx Features - a Summary; Safety Precautions

RC1xx LED Lighting Controllers - User Manual
— 5 —
1 Getting started
Before you use this product, make sure that you have read and
understood Section 2, “Safety precautions” (oder Abschnitt 3,
“Sicherheitsvorkehrungen”, ou Section 4, “Mesures de sécurité”) and
Section 11, “RC1xx reference information”, and that you have checked the
RC1xx fulls your requirements.
Mount the RC1xx (see Section 5, “Mounting the RC1xx”) and connect it up
as required (see Section 6, “Connecting the RC1xx”).
Set up the RC1xx for the desired operation as described in Section 10,
“Conguration commands”, or Section 10.2, “Front panel commands”.
We recommend that you visit www.gardasoft.com for application notes on
this range of products.
There is also a support web page there, which has information on trouble-
shooting problems.
1.1 RC1xx features - a summary
The RC1xx product is a single channel LED lighting controller for use in
machine vision applications. It can deliver 1A for the RC100 and 2A for the
RC120 in pulse mode.
The RC120 has Ethernet connectivity and may be controlled through its
own web pages .
The RC1xx has SafeSense™ which allows the controller to automatically
sense the characteristics of your lights. The RC1xx also has SafePower™
which ensures low heat dissipation and the ability to deliver higher
currents with no need for heat sinking.
2 Safety precautions
Read this before using the RC1xx. Always observe the following safety
precautions. If in doubt, contact Gardasoft Vision Ltd. The following
symbols are used in this guide:
Warning: Read the instructions to understand the possible
hazards.
Warning: Surface may get hot.
Warning: Possible hazardous voltage.
Where these symbols appear in the manual, refer to the text for the
precautions to be taken.