GARDASOFT RC1 Series - Page 4

RC1xx LED Lighting Controllers - User Manual
8 Ethernet address (RC120) 17
8.1 IP address 18
8.1.1 DHCP 18
8.1.2 Fixed IP address 19
8.2 Automatic sensing 19
9 Webpageconguration(RC120) 20
9.1 Main page 20
9.2 Conguration page 20
9.3 General setup page 21
10 Congurationcommands 22
10.1 Lighting setup 22
10.2 Front panel commands 22
10.2.1 Startup 22
10.2.2 Setting the light rating 24
10.2.3 Setting up continuous output 24
10.2.4 Setting up switched output 25
10.2.5 Setting up pulsed operation 25
10.2.6 Setting time periods 26
10.2.7 Setting the internal trigger timer 27
10.2.8 Using the key lock 28
10.2.9 Viewing the trigger status 29
10.2.10 Viewing the output current 29
10.3 Ethernet commands (RC120) 30
10.3.1 Ethernet communication 30
10.3.2 Command structure 30
10.3.3 General commands 31
10.3.4 Lighting commands 35
10.4 Command summary 36
11 RC1xx reference information 37
11.1 Specications and ratings 37
11.2 Restrictions 38
11.2.1 Continuous mode 38
11.2.2 Switched mode 38
11.2.3 Pulse mode 38
11.3 Event codes 39
11.4 Error codes 40