GARDASOFT RT 20 Series - Page 34

RTxxx LEDlighting controllers - User Manual
Use the
p
and
q
buttons to select
SCo
and
press the
SEL
button.
bri
is displayed. Press the
SEL
button to
select the light's intensity.
Use the p and q buttons to set the intensity
from 1% to 99.9%. The default setting is 50%.
Press the SELbutton.
To set the error detection, press the
SEL
button with
F E
displayed.
Or...
If you wish to disable the error detection, use
the
p
and
q
buttons to select
F-E
, and press
the
SEL
button.
— 34 —