GARDASOFT RT 20 Series - Setting up Selected Output

RTxxx LEDlighting controllers - User Manual
If you wish to disable the error detection, use
the
p
and
q
buttons to select
F-E
, and press
the
SEL
button.
Switched output is set up on the RT200.
9.5 Setting up selected output
Set up selected output if you want to switch between to lighting levels
on a trigger input. Press and hold SELfor one second , CH1 is
displayed. Use the p and q buttons to select the channel you want to
set up, and follow the keystrokes below:
The channel you want to set up is displayed.
Press the
SEL
button.
Use the
p
and
q
buttons to select
SSE
and
press the
SEL
button.
b1
is displayed. Press the
SEL
button to set
the first intensity level.
— 37 —