GARDASOFT RT 20 Series - Page 38

RTxxx LEDlighting controllers - User Manual
Use the p and q buttons to set the first
intensity level from 1% to 99.9%. The default
setting is 50%.
Press the SELbutton.
b2
is displayed. Press the
SEL
button to set
the second intensity level.
Use the p and q buttons to set the second
intensity level from 1% to 99.9%. The default
setting is 50%.
Press the SELbutton.
trg
is displayed. Press the
SEL
button.
Use the p and q buttons to select the trig-
ger (
IP1
or
IP2
) you want to set up, and press
the
SEL
button.
— 38 —