RTxxx LEDlighting controllers - User Manual
OFF
is displayed. Press the
SEL
button to end
the sequence. Or...
Use the
p
and
q
buttons to select
On
and
press the
SEL
button.
The internal trigger is running with the
parameters set up in Section 9.6, Setting up
pulsed operation.
9.9 Using the key lock
You can lock the RT200 front panel keypad so that unauthorised users
cannot change the configuration. To do this you can set a numeric
code from 0 to 255, which provides moderate protection.
To lock the keypad, press and hold SEL for one second. CH1 is
displayed. Follow the keystrokes below:
Use the
p
and
q
buttons to select
LOC
, and
press the
SEL
button.
— 46 —
To Next Page
Loading...
