GARDASOFT RT 20 Series - Page 36

RTxxx LEDlighting controllers - User Manual
trg
is displayed. Press the
SEL
button.
Use the p and q buttons to select the
trigger (
IP1
or
IP2
) you want to set up, and
press the
SEL
button.
To set the trigger polarity so that it is active
high, press the
SEL
button with
F P
displayed. Or...
If you wish to set the trigger polarity so that it
is active low, use the p and q buttons to
select
F-P
and press the
SEL
button.
To set the error detection, press the
SEL
button with
F E
displayed.
Or...
— 36 —