GARDASOFT RT 20 Series - Page 49

RTxxx LEDlighting controllers - User Manual
To view the output current, press the SEL button for one second and
CH1 is displayed. Follow the keystrokes below:
Use the
p
and
q
buttons to select
UAL
and
press the
SEL
button.
CH1
is displayed. Use the
p
and
q
buttons
to select
CH2
if you wish to view the output
current from channel 2. Press the
SEL
button.
The measured output current is displayed.
Press the
SEL
button.
Continue to use the RT200 normally.
— 49 —