GARDTEC 872 - Page 101

22) Press YES or NO as required
Display will show.
For Dedicated line use Tone + Volts.
For Shared line use Line Volts.
23) Press NO until the required setting is shown.
Display will show for example.
For Shared line.
24) Press YES. Display will show.
For Dedicated line use High
For Shared line use Low
25) Press NO until the required setting is shown.
Display will show for example.
For Shared line.
Page 100
Line Monitor
= Tone + Volts
Line Monitor
> Line Volts
Line Security
= High
Line Security
> Low
Appendix 1
GardTec 872
872.qxd 05/11/2003 15:01 Page 100