Page 63
GardTec 872
Programming
Menu Shortcut Numbers
Due to the vast range of features available on the GardTec 872 control panel an
LCD keypad must be used for programming.
For DD243:2002 options please refer to page 85.
Menu No. Jumps to
1 Relay Mode / PGM3 Mode
2 Timers On Time
3 Timers On Time
4 Timers Off Time
5 Timers Off Time
6 PA Mode
7 PA Mode
8 Chime Level
9 Entry Exit Level
10 Exit Sounder Mode
11 Final Set Delay
12 Full Set Setting Time / Setting Mode
13 Part 1 Set Setting Time / Setting Mode
14 Part 2 Set Setting Time / Setting Mode
15 Part 3 Set Setting Time / Setting Mode
16 Full Set Setting Time / Setting Mode
17 Part 1 Set Setting Time / Setting Mode
18 Part 2 Set Setting Time / Setting Mode
19 Part 3 Set Setting Mode / Setting Time
20 Alert 1 Keys Mode / On Off
21 Alert 2 Keys Mode / On Off
22 No. of Keypads / Multi On Off / Keyswitch
23 Bell Delay / No. of Bell Arms
24 Bell Ring Time / Sounder Mode
25 Bell Delay / No. of Arms
26 NovActive On Off
27 Bell Tamper Ring On Off
28 Entry Time 1
29 Entry Time 2 (use 00 for DD243:2002 system)
30 Digi Delay / Part Alarm Digi
31 D1 Mode / D2 Mode
32 D1 Mode / D2 Mode
33 Channel Start Polarity
34 Digicom Type
35 Key Beep Level
To Next Page
Loading...
