Page 64
GardTec 872
Programming
Menu No. Jumps to
36 No. of Keypads / Multi On Off / Keyswitch
37 Zone Re-Arm / Double Knock Time
38 Engineer Code
39 Remote Reset / Line Fault Source
40 Line Fault Sounders
41 Line Fault Mode
42 Line Fault Log
43 Duress On Off
44 Latch Terminal Mode
45 Bell Ring Time / Sounder Mode
46 Alarm Reset Mode
47 Tamper Reset Mode
48 Backlight Mode
49 Zone Re-Arm / Double Knock Time
50 On-Board Zone Wiring Modes
51 On-Board Zone Wiring Modes (enter zone No.)
52 Test Zone (entering zones to be on test)
53 Service Timer On Off
54 Service Due Weeks
55 Zone Log Limit
56 Alert 1 Keys Mode / Alert 1 Keys On Off
57 Alert 2 Keys Mode / Alert 2 Keys On Off
58 Digicom Channels
59 Digicom Channels
60 Digicom Channels
61 Digicom Channels
62 Digicom Channels
63 Digicom Channels
64 Alarm Restore / Abort Time
65 Digicom Type or Test
66 E/E Zones in Part Set
67 Engineer Code Locked / Unlocked
68 Strobe Confirm
69 Auto Part Set
70 Part Set Bells
71 Zone Types (enter zone No.)
72 Zone Expansion Type
73 ID mapping (set expansion type ZEX / ID first)
74 ID mapping (set expansion type ZEX / ID first)
75 N/A
76 N/A
77 N/A
To Next Page
Loading...
