GARDTEC GT490X - Page 29

Page 28
490X Engineer’s Reference Guide
53) If you do not wish to enter Ch1 Zone press Yes
and jump to Step 57
Otherwise
Press No. The display will show:-
54) Enter the Zone number you require for Ch1
followed by Yes.
The display will show for example:-
55) To add more Zones to Ch1 repeat from Step 53
56) When you have finished adding Zones to Ch1
press Yes
57) The display will show:-
58) If you do not wish to enter Ch2 Zone press Yes
and jump to Step 62
Otherwise
Press No. The display will show:-
59) Enter the Zone number you require for Ch2
followed by Yes.
The display will show for example:-
Ch1 001
Ch2 006
Enter Zone # _ _ _
then +YES or -NO
Enter Zone # _ _ _
then +YES or -NO
Ch2 None
490X 1.qxd 11/07/2006 12:32 Page 28