Page 33
490X Engineer’s Reference Guide
13) Use the No key to scroll through the
Setting Modes.
14) When the Setting Mode you require is displayed
press Yes. The display will show:-
15) Press No. The display will show:-
16) Press Yes. The display will show:-
17) Press No twice. The display will show:-
18) Enter the time you require as the Exit Time
(in seconds) followed by Yes.
The display will show for example:-
19) Use the No key to scroll through the
Setting Modes.
20) When the Setting Mode you Require is displayed
press Yes. The display will show:-
Program Setting
for PART 1 set ?
Program Setting
for PART 2 set ?
Program Setting
for PART 2 set ?
P2-Exit time =30s
=Set by TIME
P2-Exit time >_ _s
=Set by TIME
P2-Exit time =20s
>Set by TIME
490X 1.qxd 11/07/2006 12:32 Page 33
To Next Page
Loading...
