Page 50
490X Engineer’s Reference Guide
14) Press Yes. The display will show:-
When programming Digicom Channels Channel 1 is normally Fire, Channel 2 is
normally PA (Panic), Channel 3 is normally Alarm (unconfirmed) and Channel 4
is normally Open/Close.
Channels 5, 6, 7 & 8 will be advised by your Central Station.
Other signals you may require for DD243 are.
Alarm Abort
Zone Exclude
Alarm B (Confirmed)
Channel settings available are.
Off
Zone 24Hr
Gen. Tamper
Alert
Fire
Part-Set
Open/Close
Panic
Alarm
Alarm B
Alarm Abort
Power Fail
Watchdog
Mains Fail
Perimeter
Zone Exclude
Const. Lo-Bat (Radio)
Radio Lost (Radio)
Const. Jjam. (Radio)
15) Press No until the required setting is displayed
16) Press Yes. The display will show:-
Ch1 = Off
Ch4 = Off
Ch1 = Off
Ch4 >Off
490X 1.qxd 11/07/2006 12:32 Page 50
To Next Page
Loading...
