Page 52
490X Engineer’s Reference Guide
27) Press No until he required setting is displayed.
28) Press Yes. The display will show:-
29) Press No until the required setting is displayed
30) Press Yes. The display will show:-
31) Press No. The display will show:-
32) Press Yes. The display will show:-
33) Press No. The display will show:-
34) Press Yes. The display will show for example:-
Ch7 = Off
Ch8 > Off
Program Digicom
Channels ?
Program Digicom
Functions ?
Program Modem
Functions ?
Modem Mode
= No Return
View Modem Log ?
490X 1.qxd 11/07/2006 12:32 Page 52
To Next Page
Loading...
