GARDTEC GT490X - Confirm on Entry?; Sounder Mode?; Reset Mode?

Page 85
490X Engineer’s Reference Guide
7) The display will show:-
8) Press No. The display will show:-
9) Press Yes. The display will show:-
Confirm on Entry may be On only if you are
using an ACE device to Unset the system.
10) Press No until the required setting is displayed
then press Yes. The display will show:-
11) Press No. The display will show:-
12) Press Yes. The display will show:-
The term Sounder relates to the system speaker(s)
13) Press No until the required setting is displayed
then press Yes. The display will show:-
14) Press No. The display will show:-
15) Press Yes. The display will show:-
Program Confirm
Window Time ?
Program Confirm
On Entry ?
Program Confirm
On Entry ?
Program Confirm
Sounder Mode ?
Program Confirm
Sounder Mode ?
Program Confirm
Reset Mode ?
Unconfirm Reset
= Any ?
Sounder Trigger
= Unconfirmed
Confirm on Entry
= On
490X 1.qxd 11/07/2006 12:32 Page 85