Page 86
490X Engineer’s Reference Guide
16) Press No until the required setting is displayed
then press Yes. The display will show:-
17) Press No. The Display will show:-
18) Press Yes. The display will show:-
19) Press No twice. The display will show:-
20) Enter the time required then press Yes.
The display will show:-
21) Press No. The display will show:-
22) Press Yes. The display will show:-
23) Press No until the required setting is displayed
then press Yes. The display will show:-
24) Press No. The display will show:-
Program Confirm
Reset Mode ?
Program Confirm
Secondary Time ?
Program Confirm
Secondary Time ?
Program Confirm
ET Mode ?
Program Confirm
ET Mode ?
Program Confirm
Bell Mode ?
ET Mode
= Set Only
Secondary Window
= 060m
Secondary Window
= _ _ _m
490X 1.qxd 11/07/2006 12:32 Page 86
To Next Page
Loading...
