Page 88
490X Engineer’s Reference Guide
34) Press No. The display will show:-
35) Press Yes. The display will show:-
36) Press No until the required setting is displayed
then press Yes. The display will show:-
37) Press No. The display will show:-
38) Press Yes. The display will show:-
Always On = Keypad is always active.
Off in Entry = Keypad is disabled during
Entry Time.
Of in Ent/Alm = Keypad is disabled during
Entry time or if Entry Time
goes through into Alarm.
39) Press No until the required setting is displayed
then press Yes. The display will show:-
40) This concludes the Program Diagnostics
Press 0 (zero) three times to return to:-
Program Confirm
Comms. Restore ?
Program Confirm
Keypad Opening ?
Program Confirm
Keypad Opening ?
Keypad Opening
= Always On
Program Confirm
Comms. Restore ?
Comms. Restore
= On
01Jan 00: 00: 01
490X 1.qxd 11/07/2006 12:32 Page 88
To Next Page
Loading...
