Do you have a question about the Garmin GPSMAP 376C and is the answer not in the manual?
Display Type | Color TFT |
---|---|
Battery | Rechargeable Lithium-ion |
Waterproof | Yes (IPX7) |
Routes | 50 |
Track log | 10, 000 points |
Basemap | Yes |
Ability to add maps | Yes |
Connectivity | USB |
Display Size | 3.8 in |
Antenna | Built-in |
Waypoints/favorites/locations | 3, 000 |
Accepts data cards | Yes, SD card |
Sensors | Barometric altimeter |
Additional Features | Marine capabilities |
Receiver | High-sensitivity |
Crucial safety guidelines for installation, operation, and device usage.
Instructions for charging the battery and using the Charge Mode feature.
Explains satellite acquisition, viewing GPS status, and receiver status.
Explains the function of each key on the GPSMAP 376C keypad.
How to search for addresses, POIs, and other items using the Find Menu.
How to create and store reversible routes with multiple points.
How to record and store locations as waypoints for later use.
How the GPSMAP 376C draws a track log and manages track data.
How to use a saved track for TracBack navigation.
Describes the Map Page display, modes, data fields, and zoom controls.
Guides navigation with a graphic compass and bearing pointer.
How to navigate to a destination in Automotive Mode with prompts and directions.
How to follow a saved route and edit it while navigating.
How to specify roads/areas to avoid and create detour routes.
How the GPSMAP 376C guides you via Map and Current Route Pages.
Explains the Map Page display with data fields and zoom controls.
Shows route turns and how to save the current route.
Displays important trip data like speed, average speed, and moving time.
View XM channels, manage favorites, and get service information.
Shows stored routes and manages waypoints using User/Proximity tabs.
Specifies track log recording and Digital Selective Calling setup.
Explains receiving DSC distress calls, position reports, and alarms.
How to initiate a Distress Call using the VHF radio's MayDay button.
How to turn DSC on/off and set up sonar features.
Define alarm settings and configure navigation-related alarms.
Sets display features like pages in sequence and backlight duration.
Customizes sounds made by the GPSMAP 376C, including beeper and voice prompts.
Adjusts system settings like mode, speed filter, language, and external power.
Selects road routing settings like preference, calculation method, and avoidance.
Accesses weather info for current or other locations via the Find Menu.
Explains sonar page features, returns, symbols, and display modes.
Explains how sonar works, transducer signals, and data interpretation.