Garmin GPSMAP 4212 - To create a route using automatic guidance; To edit a route; To delete a route; To bypass a waypoint on a route

28 GPSMAP 4000 Series Owner’s Manual
Where To?
Where
to?
To create a route using automatic guidance:
Automatic guidance is available with a preprogrammed BlueChart g2 Vision SD card.
1. From the Navigation chart or the Where To? menu, select your destination.
2. Select Navigate To > Guide To. Your route is calculated.
NOTE: You can change the automatic guidance path to a route by selecting the end of the path and
selecting Navigate To > Route To. The automatic guidance path stays on the screen, allowing you to
trace it while creating a route.
To edit a route:
1. From the Home screen, select Information > User Data > Routes.
2. Select a route.
3. Select Review > Edit Route. You can edit the route name or edit the route turns.
To delete a route:
1. From the Home screen, select Information > User Data > Routes.
2. Select a route.
3. Select Review > Delete.
To bypass a waypoint on a route:
1. Create a route (page 28).
2. Select the waypoint that follows the waypoint you are bypassing.
3. Select Route To.
Navigating with a Garmin Autopilot
When you start any type of navigation (Go To, Route To, Guide To, or Follow Track), if you are
connected to a compatible Garmin autopilot (such as a GHP
™
10), you will be prompted to engage
the autopilot.