68 GPSMAP 4000 Series Owner’s Manual
Appendix
Capturing Screenshots
You can capture a screenshot of any screen displayed on your chartplotter as a bitmap (.BMP) le
and then transfer it to your computer.
To capture screenshots:
1. Insert an SD card into the SD card slot on the front of the chartplotter.
2. Select Congure > System > Beeper/Display.
3. Select Screenshot Capture to turn on screenshot captures.
4. When you are on a screen you want to capture, press the HOME button for at least six seconds.
After a few moments, the Screenshot Taken window is displayed.
5. Select OK.
To copy the screenshots to your computer:
1. Remove the SD card from the chartplotter and insert it into an SD card reader that is attached to
a computer.
2. From Windows Explorer, open the Garmin\scrn folder on the SD card.
3. Copy the appropriate .BMP le on the card and paste it to any location on the computer.
To Next Page
Loading...
