Name: Garrett AT Max
Brand: Garrett
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Garrett Metal Detectors AT Max

™

Quick Start Guide

1. Power ON.

Press the ON / OFF Power button for 1 second. The AT Max powers

on in the last mode used and is ready to search. The detector

operates with four (4) AA batteries which are already installed by

Garrett.

2. Select Mode.

Use the Mode button to select a different detection mode, when

desired. (Factory default mode is Coins.)

3. Adjust settings.

Adjust Sensitivity, Threshold, Volume, or Discrimination settings,

if desired.

4. Begin scanning.

Lower the searchcoil to approximately 1 inch above the ground

and scan the coil left and right at approximately 3 ft/second.

The coil must be in motion for target detection, but can remain

stationary during Pinpoint.

Components

Searchcoil

Camlock

Lower Stem

Upper Stem

Camlock

Handle Grip

S-shaped Stem

Arm Strap

Detector

Stand

Arm Cuff

Control

Box

Battery

Access

Hatch

Display Screen,

Pushbutton

Controls

Questions and Answers:

Need help?

Do you have a question about the Garrett AT Max and is the answer not in the manual?

Garrett AT Max Specifications

General