Name: Garrett AT Max
Brand: Garrett
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Detector Assembly

Garrett Metal Detectors AT Max

™

AT Max Contents

If any part is missing, please contact Garrett Customer Service.

Nut, bolt,

mounting

washers

Batteries

installed

Control housing with

S-shaped stem

Searchcoil (with coil cover installed)

Upper, lower stem (connected)

MS-3 wireless headphones

Warranty card

Manuals

Loosen lower camlock by turning it right (clockwise) while

holding the upper and lower stem assembly in front of you as

shown below. Extend lower stem, and press mounting washers

firmly into place.

Connect searchcoil to stem as shown, and hand-tighten wing

nut. Loosen upper camlock, depress the spring clip in the S-stem

(containing control housing), and insert the S-stem through the

upper camlock collar into the upper stem.

1st pin position

Note: The spring clip must be

engaged in the FIRST stem

opening in order to access

battery compartment.

USB charging cable

Questions and Answers:

Need help?

Do you have a question about the Garrett AT Max and is the answer not in the manual?

Garrett AT Max Specifications

General