Gate Aster BASIC - Quick Access Menu

Quick Access Menu23
Quick Access Menu
You can set Pre-cocking mode, Prole of settings or go to programming mode by
using a shortcut. Aer ring a shot, burst or while in Safe mode* (if safety lever is
removed), hold the trigger and switch re selector in appropriate time (see table).
To change options of given function, switch re selector. Each switch means going
to a next option. Options are indicated by relevant vibrations.
By releasing the trigger, you exit the function and now your device operates
according to the selected Pre-cocking mode or prole.
Function Pre-cocking mode Proles of settings Programming via trigger
To enter the function,
hold the trigger
and switch re selector
in < 2 s
and switch re selector
within 2–7 s
for > 7 s
Available options
Option Low vibrations Option High vibrations
See description
on page 26
O 1 P1 1
On 2
P2 2
P3 3
* You can enter programming via trigger mode only when re selector is on SEMI position and Auto
mode is not assigned to that position.