ASTER Troubleshooting49
Under Voltage Protection 3 (UVP3)
Protection against over-discharge of the battery. Battery protection
was activated immediately aer connecting the battery.
What happened:
1. Number of cells is dierent than their number set in GCS
2. The battery is discharged
What to do:
1. Set the same number of cells in GCS as in the battery
2. Charge the battery
Motor Disc (MOTOR DISC)
ASTER did not detect the motor.
What happened:
1. Motor is not connected
2. Brushes are worn out
3
4
To Next Page
Loading...
Need help?
General
