44
Diagnostic Trouble Codes
Diagnostic Trouble Codes (DTC) enable detecting basic malfunctions and problems
with your AEG or ASTER. You are notied of the main errors with LED glowing
in the trigger hole and motor vibrations. These light-and-sound sequences are
activated once given malfunction takes place. DTC can be later read and cleared
in DTC menu in GCS app as well as in the programming mode from the level of
Advanced function settings. In the latter case, LED blinks the same number of
times as the motor vibrates, so you can check DTC even without the motor.
In the event of trouble:
1. LED in the trigger hole glows in the color reecting problem type
a. Yellow means warning
b. Red means problem
c. Red-Blue blinking alternately means that device failed on self-test
d. Red-Yellow blinking alternately means other error
To Next Page
Loading...
Need help?
General
