Quick Access Menu25
Selecting Proles of settings
Proles are sets of particular settings of congurable ASTER functions*. There are
3 proles possible to select at a time and one of them is set as currently active. If
you want to change the active Prole of settings:
1. Fire a shot, burst or pull the trigger while in Safe mode**
2. Keep the trigger hold
3. Switch re selector within 2–7 s. You should hear 1 high vibration.
4. Now each re selector switch means a next option:
a. 1 high vibration – Prole 1
b. 2 high vibrations – Prole 2
c. 3 high vibrations – Prole 3
5. Release the trigger to save selected prole
* Proles of settings are dened in GCS and are available only in EXPERT rmware edition.
** If safety lever is removed.
To Next Page
Loading...
Need help?
General
