14
Attaching the Hand Strap
To prevent accidental dropping of the camera, always use the strap.
Attach the hand strap as follows:
1. Thread the small loop of the hand strap
through the strap eyelet on the camera.
2. Pull the large loop through the small loop
until the strap is firmly secured.
Inserting an SD Memory Card
The camera comes with 8MB of internal memory, allowing you to store images and video clips
in the camera. However, you can expand the memory capacity by using an optional SD
memory card so that you can store more images and video clips.
1. Make sure the camera is turned off.
2. Open the battery/card cover.
3. Insert an SD memory card:
The front side of the memory card (printed arrow)
should face towards the front side of the camera.
If the card cannot be inserted, check the orientation.
This camera is also compatible with the MultiMediaCard .
4. Close the battery/card cover.
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4614
To Next Page
Loading...