Gateway DC-T20 - Playback Mode; Playing Back Photographed Images (Single-Frame Playback)

24
Playback Mode
In the mode, you can view, magnify your images or play back video clips. This mode even
provides thumbnail images display and slide show, allowing you to quickly search for the
image that you want or play the images back one by one automatically.
Playing Back Photographed Images (Single-Frame Playback)
Play back photographed still images one image at a time.
1. Toggle the button to the
mode.
The last recorded image appears on the LCD monitor.
2. Select the image that you want to view by using the
or button.
To view the previous image, press the button.
To view the next image, press the button.
Note:
If there is no image stored in the internal memory or on the memory card, the [NO IMAGE]
message will appear on the LCD monitor.
You can also view your images on the TV screen. First connect one end of the video cable
to the video out jack of the camera. Then connect the other end to the video input jack of
the TV. Toggle the button to the
mode and then turn the TV and camera on.
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4724