39
LIGHT FREQUENCY
The camera supports different lighting frequencies: 50Hz and 60Hz. When photographing
under fluorescent lighting, select the correct frequency setting depending on your local
area's voltage. This function is only effective if you set the White Balance to (Fluorescent)
setting.
50Hz: Light frequency is set to 50Hz.
60Hz: Light frequency is set to 60Hz.
FACTORY SETUP
This function will restore all the parameters to the default settings.
CANCEL: Retain the current settings.
SETUP : Reset to default settings.
VIDEO MODE
Set the video output format for displaying recorded images on a television.
NTSC: NTSC system.
PAL
: PAL system.
Press the button to confirm the selection.
FACTORY SETUP menu appears.
To return to default settings, select YES by using the
or button and
press the
button.
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4839
To Next Page
Loading...
