Gateway DC-T20 - Setting the DPOF

To Next Page

To Previous Page

Setting the DPOF

DPOF is the standard for recording printing information directly on the SD memory cards and

other media. Files saved in the DPOF format can be printed using compatible printers or

through a laboratory printing service.

1. Toggle the button to the mode.

2. Press the button.

3. Move to DPOF by using the

button.

4. You can select the desired DPOF sub-menu by using the

or button, press the button.

ONE BY ONE: Select image quantity on the selected image.

Select the image by using the or button.

Select the desired quantity (0:Disable; 1~9: Enable) by

using the

or button, and press the button.

ALL 1 PCS: Set image quantity as 1.

Press the button to confirm the setting.

DELETE ALL: Delete all DPOF settings (Quantity: 0).

Press the button to confirm the setting.

5. To exit from the menu mode at anytime, press the button again or press the

button.

Note:

This function can be used only on still image files.

Related product manuals