Gateway DC-T20 - Using the Normal Mode; Digital Zoom Photography

17
Note:
The LCD monitor darkens in strong sunlight or bright light. This is not a malfunction.
Using the LCD monitor for an extended period of time will decrease the number of images
you can take. To increase battery longevity, turn the LCD monitor off and use the viewfinder
instead.
Always use the LCD monitor for macro shots.
The LCD monitor must be on when Digital Zoom is to be used.
Using the Normal Mode
Normal mode is used to take images where the distance to the subject is 3.9 ft (1.2 m) or more.
Select this mode for general shooting, including portraits and scenery.
1. Toggle the button to the
mode.
2. Set the focus dial to the
position.
3. Compose the picture.
4. Press the shutter button.
Note:
For better results, we recommend that you use the Normal mode if the distance to the
subject is 2.3 ft (0.7 m) or more.
Digital Zoom Photography
By using digital zoom, images appear closer. Whereas digital zoom is a compelling feature, the
more an image is enlarged (zoomed), the more pixilated (grainier) the image will appear. To
enable the digital zoom, toggle the button.
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4617