15
To remove a memory card:
Make sure the camera is off. Open the battery/card cover. Press lightly on the edge of the
memory card and it will eject.
Note:
To prevent valuable data from being accidentally erased
from an SD memory card you can slide the write protect
tab (on the side of the SD memory card) to “LOCK”.
To save, edit, or erase data on an SD memory card, you
must unlock the card .
Setting the Date and Time
The date/time setting screen (on Step 5) will pop out under the two situations below:
When first turning the camera on.
When turning the power on after leaving the camera without batteries for an extended
period of time.
1. Turn the camera on by pressing the
button.
2. Toggle the button to
/ / mode.
3. Press the button.
4. SETUP MENU will be highlighted, and press the button.
5. Move to the DATE/TIME by using the
or button, and press the button.
DATE/TIME menu appears.
To select an item, press the or button.
To change the value for each option, press the or
button.
When all options are set, press the button.
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4615
To Next Page
Loading...